TL Advantage Workstations From Sovella

TL Advantage workstations are well suited for a variety of applications, including: assembly, burn-in, test, repair, lab, and many light manufacturing applications. TL Advantage utilizes an industry-exclusive standard ESD semi-conductive paint (proprietary process) and can be outfitted with a vast number of standard accessories. With its incredible strength, flexibility, and durability, the TL Advantage workstation is the most cost effective ergonomic workstation solution on the market today. Workstations are available in 6 widths and in ESD or non-ESD models.

 

Single-Sided Workstations Include:

• Frame
• Worksurface
• Steel Shelf
• Footrest
• 6 Outlet Power
• Dual LED Light
• ESD units include a ground cord

Double-Sided Workstations Include:

• Double-Sided Frame
• 2 Worksurfaces
• 2 Steel Shelves
• 2 Footrests
• (2) 6 Outlet Power
• Dual LED Light
• ESD units include a ground cord

 

Features:

• Paint: Semi Conductive ESD Paint Standard - Proprietary Process.
• Color: 35 Sovella Light Gray
• Worksurfaces: Ergonomic 180 degree rolled front edge for maximum comfort
• Shelves can be placed above and below worksurface
• Height of worksurface is adjustable in 1" increments along the full length of 75.59" (H) upright
• Load Capacity: Work Surface holds 330-lbs and the TLA Upright frame has a 880-lbs overall capacity
• Cleanrooms: Suitable for use in Class 10,000 Cleanrooms
• Workstations are easily assembled with 4 simple tools: #1 Phillips, 13mm and 19mm Combo Wrench and a 5mm Allen Wrench
• ESD Workstations: Feature Micastat^® Dissipative Laminate, which meets ANSI/ESD s20.20 requiring RTG <10⁹ Ω per ESD s4.1. ESD Workstations include grounding cord.

MetroMax Q Storage System From Metro

The MetroMax Q™ storage system provides the most cleanable and adjustable shelving for all your storage and transport needs. Store safe and store more. MetroMax Q™ shelf mats, posts and frames have built-in Microban^® antimicrobial product protection. Microban^® protects these high contact areas from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. Microban^® protection keeps the product "cleaner between cleanings." Quick-to-adjust shelves provide maximum space utilization. Epoxy coated wire shelf frames and posts. A wide range of accessories such as dividers, ledges, tote and tray slides and many more allow you to customize MetroMax Q™ to your exact needs. MetroMax Q™ is also available in Mobile Shelves and Utility Carts. View the full line of shelving units and accessories at EWD Solutions.

 

Longer-Life Performance:

• Durable, corrosion proof polymer mats protect the shelves from normal wear and tear
• Robust epoxy coated steel frames and posts hold as much weight as Metro's wire shelving
• 800-lbs. capacity per shelf for lengths of 24" to 48" (evenly distributed)
• 600-lbs. capacity per shelf for lengths of 54" or longer (evenly distributed)
• 2,000-lbs. maximum capacity per stationary unit

 

Interchangeable:

• MextroMax Q™ and MetroMax i™ shelves, posts and most accessories are compatible on the same unit

 

Open Grid Shelves:

• Promote air circulation and light penetration
• Quick To Adjust:
• Patented corner release allows shelves to be unlocked without tools
• Simply flip each corner release, relocate the wedge connectors on the posts and reposition the shelf
• Quickly adjust shelves to reclaim wasted vertical space

 

Quick To Assemble:

• Assembles easily in minutes, without tools
• Shelves can be adjusted at 1" increments along the post
• Shelf wedges have a window to locate your desired position
• Stationary posts are fitted with adjustable leveling bolts to compensate for uneven surfaces

 

 

Universal Racks From Fancort

Fancort Universal Racks are ideal for handling clinched, SMD, soldered or bare boards of any size with no adjustment. These Universal Racks are each slightly different in size, design and slot shape in a choice of materials to meet a wide variety of applications.

Model RA-20:

• Measures 7" x 20" and weighs 2-lbs.
• 20 slots with easy to load angle, measure 1.25" x .325" on a .750" pitch
• Rugged construction with heavy reinforcing ribs
• Open carrying handles and drainage holes
• Stackable when not in use to conserve space
• Standard black conductive material

Model RA-18:

• Measures 6" x 18" and weighs .5-lbs.
• 25 slots with parallel sides for more rigid holding, measure .125" x .300" on a .625" pitch
• Undercut ends for carrying handles
• Double wide models expand to hold boards up to 24" wide with a carrying handle; measures 20" (W) x 18" (L)
• Standard black conductive material

Model RA-24:

• Measures 8-3/8" x 23"
• 20 slots with easy to load angle, measure .125" x .325" on a 1.000" pitch
• Rugged construction with heavy reinforcing ribs
• Open carrying handles and stackable with similar models
• Molded in reinforced material
• Standard black conductive material

 Fancort also offers PCB Magazine Racks, PCB Flip-Racks and more.

Threadlockers From Loctite

Threadlockers from Loctite are a single component anaerobic adhesive comprised of unique liquid resins that harden (or cure) to a durable solid when exposed to metal ions in the absence of air. The anaerobic cure mechanism allows the adhesive to flow and evenly settle to lock and seal threaded fasteners without curing permanently. Any excess threadlocker will remain liquid, and is easily wiped away from the assembly. They are designed for the locking and sealing of threaded fasteners which require easy disassembly with standard hand tools. Threadlockers protects against vibrations, loosening, leakage and thread corrosion. Cures without cracking or shrinking. Resists lubricants, solvents and most chemicals. Locks, seals and retains nuts, bolts, screws, fittings and assemblies. Stops rust and corrosion.

Choosing the right threadlocker for your application:

Low Strength: Purple color, removable with hand tools, good for adjustment screws, calibration screws, meters and gauges, and for fasteners up to 1/4" in diameter

Medium Strength: Blue color, removable with hand tools, good for machine tools and presses, pumps and compressors, mounting bolts, gearboxes, and for fasteners up to 2" in diameter. Available in liquid, tape and stick formats.

High Strength: Red color, for permanent assemblies, heavy equipment, suspension bolts, motor and pump mounts, bearing cap bolts and studs, and for fasteners up to 1" and larger in diameter

Wicking: Green color, removable with heat and hand tools, for pre-assembled fasteners, instrumentation screws, electrical connectors, carburetors and fasteners up to 1/2" in diameter.

View the full selection of Loctite Threadlockers at EWD Solutions.

And learn more about the difference in in Red, Blue, Green and Purple Threadlockers on the Loctite website.

Dissipative In-Plant Handlers From Protektive Pak

In-Plant Handlers shield ESD sensitive items from charges and electrostatic discharges (with lid in place). They are constructed of impregnated corrugated material for greater durability. Static dissipative surface resistivity of 10⁶ - 10⁸ Ω. A lid is included to shield ESD sensitive components. Buried shielding layer minimizes the potential of sloughing and rub-off contamination. Made from 100% recycled material and is 100% recyclable. Easy assembly without the need for tape, glue or staples. All products are made in the USA.

View our selection of over 100 sizes of In-Plant Handlers to meet your specific needs.  

825 Cushion Stat™ Mats From NoTrax®

825 Cushion Stat™ is a dissipative/anti-static mat made from a NoTrax^® exclusive Dyna-Shield^® PVC sponge, specially formulated to absorb static electricity keeping sensitive electronic circuitry safe from damage. The non-directional pebble embossed top surface is easy to clean and provides excellent traction. Ideal for workstation environments that require anti-fatigue relief while working with delicate circuitry or components. Overall thickness is 3/8". Available in pre-cut mats, rolls and custom pre-cut sizes.

Cushion-Stat™ with Dyna-Shield^® is manufactured with a tough protective top layer that increases the strength of the product and provides long lasting wear. Dyna-Shield^® is a revolutionary process perfected by Superior Manufacturing Group that creates a tough protective barrier on the surface of select foam anti-fatigue matting products. Dyna-Shield^® mats have greater tensile strength, and are more resistant to wear than traditional sponge matting.

Features:

• Overall thickness is 3/8"
• Dissipative/anti-static mats are formulated to absorb static electricity
• All four sides are beveled to minimize trip hazards
• Specially compounded pebble-embossed PVC sponge manufactured with exclusive Dyna-Shield^® protective top layer
• Testing is per EOS/ESD Association Draft Standard, "Standard for Protection of Electrostatic Discharge"
• Susceptible Items = Worksurfaces EOS/ESD-S4, Draft January 1988
• RTG measured at Moderate and 12% RH, at 10V and 100V = 10E9 ohms

View our selection of 825 Cushion Stat mats in both pre-cut mats and rolls.

Surface Resistance Checker From Desco

Economical Compliance Verification Surface Resistance Checker: Used for determining if a surface is dissipative, conductive, or insulative

Color Coded LEDs: Quickly provides exponent range for quick checks of EPA ESD control items

Automatic Test Range Voltage Selection Per Compliance Verification ESD TR53: Starts tests at 10 volts and automatically switches to 100 volts if the measurement is over 10E5 ohms

Once Reading is Finalized, the Surface Resistance Exponent Will Remain Displayed as Long as Test Button is Depressed: Provides exponent range of resistance measurement which is often all that is required for determining if a material is intended for an ESD Protected Area

Portable Operation With 9 Volt Battery: No charging or sourcing of special batteries needed

Flashing LED Warns When Battery Is Low: Prevents operator from making bad measurements

Optional Five Pound Electrodes and Leads For Resistance Measurements - Use the same checker to indicate resistance point-to-point (Rtt) and resistance to ground (Rtg) of larger surfaces (flooring, mats) - 19641 Test Leads - 50003 5 Pound Electrodes

NIST Calibrated: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

Made in America

 

Find more information on the 19640 Surface Resistance Checker from Desco at ewdsolutions.com