Non-Marking Sport Heel Grounders

The Non-Marking Sport Heel Grounder is ideal for boots and cross-training athletic shoes. Constructed from durable materials and featuring non-marking rubber sole, buckle closure, and unique "sport" design, this Heel Grounder provides protection for staff on the move. 

These heel grounders connect the person wearing them to ground via a proper floor mat or flooring material. Wearing the conductive ribbon inside the shoe or sock assures proper electrical contact with the user. A rugged 1 meg ohm molded resistor is standard. The red elastic strap conforms to shoes for a tight fit. Heel grounders are worn on both feet to provide consistent grounding while in motion.

EWD Solutions is selling these Heel Grounders for $4.00 each while supplies last.
 

Specifications:

• Resistor: 1 meg ohm (+/- 5% tolerance), molded
• Colors: Blue hook and loop, red elastic, gray non-marking rubber
• RTG: <10 meg
• Ribbon: Conductive yarn in gray polyester ribbon
• Meets or exceeds requirements of ANSI ESD-S20.20
• Note: Heel grounders are dependent on foot perspiration in the shoe to create and maintain electrical contact with the body - The Non-Marking Sport Heel Grounder works reliably with stockings and socks due to the moisture present

TCMB Tool Kit From Xcelite

The Model TCMB Tool Kit from Xcelite is one of the largest and most elaborate tool kits on the market today. It contains 53 individual hand tools, 31 Series 99 interchangeable screwdriver/nutdriver blades and handles, and 2 specialized screwdriver/nutdriver kits. The extra large roller bearing wheels on the case provide a wide base for maximum stability and easy transport over rough pavement or stairs. The extra wide, comfortable extension handle is molded into the case to prevent wear and locks in place automatically when extended and retracted. Easy one-handed release. Two spring-loaded tote handles offer convenience and protection. Included a "D" ring for bungee cords to carry other cases on top. The case is super tough, black polyethylene rotationally molded for maximum strength. Minimum wall thickness of 0.120". Includes a 3-panel hinged tool pallet in the lid, plus an additional pallet in the bottom. Extra large storage space for additional equipment. Includes an extra large all new screen mesh literature/utility pocket.

Visit EWD Solutions to learn more about this comprehensive tool kit.

Cleanroom Swabs From Techspray & Chemtronics

EWD Solutions offers Cleanroom swabs from leading manufacturers Techspray and Chemtronics.

Techspray Clearnoom Swabs: Techswabs are precisely designed, manufactured and packaged to serve a wide variety of cleaning and maintenance needs. Foam swabs are ideal for class 100 use and for precision cleaning where linting needs to be avoided. All foam swabs are manufactured with 100 pores per inch reticulated polyurethane foam, which ensures excellent absorbency while minimizing contamination. Tips are affixed by heat seal to prevent tip loss, even while saturated with solvent. Flexible tips provide versatility and softer touch, while rigid heads allow for more aggressive cleaning.

Chemtronics/Coventry Cleanroom Swabs: Coventry products keep contamination out of your process, improve yield, and perform consistently, shipment to shipment. To manufacture Coventry swabs, we start with engineered clean materials. Polyester swab and wipe components are laundered first in our Class 10 (ISO Class 4) cleanroom.Coventry’s Aqua-Prime™ process reduces particles, ionic contamination and non-volatile residue. The Aqua-Prime™ process cleans the swabs with a purified proprietary solvent blend.

MBT 350 Digital Rework System From Pace Worldwide

The MBT 350 Digital Rework System is a self contained, three channel capability offers high capacity, low temperature SMT/Thru-Hole soldering and desoldering. The system is fully programmable and can be password protected from changes.

The new dual purpose vacuum/pressure pump and delivery system featuring PACE's patented SNAP-VAC Technology, provides the most vacuum available for desoldering applications. When used with an air pencil, the high resolution, pressure control valve allows for precise adjustment when working on the smallest components such as 0201's.

An approved operating range can be programmed allowing operators the flexibility to do their work while eliminating the risks associated with giving techs access to the entire temperature range of the system.

To maximize tip life and reduce operating costs, PACE's well recognized "SetBack" & "AutoOff" features are included. The system will automatically reduce the set temperature by 50% then turn off after a user defined period of inactivity. To really protect your more expensive Tip-Heater Cartridge and fine point tips from oxidation, the TD-100 can be used with the new "Instant-SetBack Cubby". The cubby puts irons channel into SetBack if it is in the cubby for more than 45 seconds! Up to two Instant-SetBack Cubby can be connected to the MBT350.

Rework Tips sold separately.

Learn more about the MBT 350 at EWD Solutions.

Includes:

• TD-100 ThermoDrive Soldering Iron
• SX-90 Sodr-X-Tractor Desoldering Handpiece
• MT-100 MiniTweez Handpiece

Technical Specifications:

• Power Requirements: 97-127 VAC, 50/60 Hz. 240 Watts, 2 Amp max
• Dimensions: 13.5cm H x 16.5cm W x 26cm D (5.3"H x 6.5"W x 10.25"D)
• Weight: 5Kg (1lbs.)
• Tip to ground resistance: 2 ohms or less
• Temperature Stability: ± 1.1°C (± 2°F) at idle tip temp.
• Temperature accuracy: Meets or exceeds ANSI-J-Std-001
• Temperature Range: 205° to 454°C (400°to 850°F) nominal
• Vacuum and Air Vacuum Rise Time: 150ms average as measured by PACE Process Monitor
• Vacuum: 51cm Hg. (20" Hg.) nominal
• Pressure: 18psi max
• Airflow: 8 SLPM maximum

32V Shut-Off Clutch Brush Electric Screwdrivers From Delta Regis

ESL3 Series direct plug-in Electric Screwdrivers are specifically designed to meet the requirements of the industrial manufacturing market. Accurate torque control and a rubberized ergonomic grip make them an ideal solution for demanding production assembly applications. These units plug directly into an AC outlet, eliminating the need for an external power supply. Stepless torque adjustment in ranges starting from 0.2 to 4.4 Nm.

 

View our full offering of ESL3 Electric Screwdrivers.

 

Features:

• Convenient direct plug-in design - internal power and control circuitry allows driver to plug directly into 120V
• Once pre-set torque is reached, the screwdriver shuts off - the start mechanism must be reset to run again
• External torque adjustment nut - easy to set up and secure with optional torque lock sleeve
• Ergonomic - soft cushioning in grip area ensures operator comfort and reduced fatigue
• Externally replaceable brushes for ease of maintenance
• 3m power cord with standard 3 prong grounded plug
• Torque Lock Sleeves, sold separately, cover the torque adjusting nut to deter tampering

NAST Rework Station From JBC

The NAST Station from JBC is the best solution for microsoldering and desoldering of small-size components like chips 0201, 0402 etc. Tools for this station are light, tiny and ergonomic, which allows you to work at high precision. The control unit works simultaneously with the NT105 Nano Solder Iron and the Nano Tweezers, both included. Learn more about the NAST Rework Station at EWD Solutions.

Specifications:

• Nominal power: 15W
• Peak power: 30W
• Temperature selection: 90 - 450 degrees Celsius

NAST-1B includes:

• Control Unit, NA-1B
• Nano Soldering Iron, NT105-A
• Nano Tweezers, NP105-A
• Cartridge Set: C105-101, C105-103, C105-105 (x2), C105-107, C105-112 and C105-113 (x2)

VALUE-LINE Chairs From Bevco

All VALUE-LINE products have been tested by an independent laboratory to assure they meet applicable ANSI/BIFMA X5.1 standards for quality, durability and safety. All VALUE-LINE seating carries a 3-year guarantee on all components.

 

EWD offers hundreds of Bevco chairs, options and accessories. View the full selection.

 

V8 Series ESD - Upholstered

• Static-dissipative with a resistance of less than 10⁶ Ω and a grounding chain
• Sturdy five-leg base, ergonomic waterfall seat
• Upholstry: Top rated conductive fabric is BIFMA Class 1 rated for durability and meets flame retardant standards of California Technical Bulletin 117
• Black reinforced plastic base
• Contoured back w/durable bumpers
• Tilt back with adjustable tension control
• Control: Back Tilt, 360° Swivel and Pneumatic Height Adjustment
• Seat: 18" (W) x 18" (D) x 2-3/4" Thick; Foam Density: 1.8-lbs., 36 IFD
• Back: 16" (W) x 15" (H) x 2" Thick

V4 Series Chairs - Upholstered

• Sturdy five-leg base, ergonomic waterfall seat
• Contoured back with durable back pan
• Tilt back with adjustable tension control
• Black, reinforced plastic base
• BIFMA Class 1 rated Olefin fabric resists fading, pilling, punctures and moisture and meets flame retardant standards of California Technical Bulletin 117
• Control: Back Tilt, 360° Swivel and Pneumatic Height Adjustment
• Seat: 18" (W) x 18" (D) x 2-3/4" Thick; Foam Density: 1.86 lb., 36 IFD
• Back: 16" (W) x 15" (H) x 2" Thick

V7 Series Chairs - Polyurethane

• Sturdy five-leg base, ergonomic waterfall seat
• Black reinforced plastic base
• Tilt back with adjustable tension control
• Resists stains and damage from punctures, grease, water and chemicals
• Meets flame retardant standards of California Technical Bulletin 117
• Soft formed polyurethane seat: 18" (W) x 17" (D); Back: 12" (D) x 17" (W)
• Control - Back Tilt, 360° Swivel and Pneumatic Height Adjustment

Anti-Static Tape From Botron

EWD Solutions is proud to feature several models of Anti-Static Tape from industry leader, Botron.

Anti-Static Color Tape: ESD Safe cellulose tape is 2.4 mil thick with a charge decay of < 0.014 seconds. Perfect for sealing ESD bags. 3" core. Rubber based adhesive. Lead-Free, RoHS Compliant. Generates less than 250 Volts. Available in multiple colors and widths.

Clear Anti-Static Tape: ESD Safe cellulose tape is 2.4 mil thick with a charge decay of < 0.014 seconds. Perfect for sealing ESD bags, but can also be used for a wide range of workstation applications such as binding, edging and securing.

ESD Safe Conductive Grid Tape: Conductive grid tape is a 2 mil thick copolymer with a charge decay of < 0.014 seconds. Available on 3" cores in multiple widths. Acrylic based adhesive. Generates less than 50 Volts. Tensile strength of 270N/mm sq. Lead-Free, RoHS Compliant. Non-corrosive.

ESD Safe High Temperature Tape: Withstands 275 degrees Fahrenheit for 45 minutes. Designed for wave solder applications, it's rubber adhesive leaves virtually no residue and is stain free. Meets government spec: PPP-T42-TYPE1. Non-toxic and pH neutral with a low static charge. Lead-Free, RoHS Compliant.