Transforming Technologies' IN6430 Ionizing Air Gun is an effective static eliminating device that integrates best-in-class AC performance, mechanical and ergonomic design features into a superior and affordable package.
Typical AC ionizing guns require stiff and bulky high voltage (HV) cables to connect the gun to the power supply. Over time these HV cable fails. DC ionizing guns eliminate HV cables, but ion balance is limited. DC emitter points are vulnerable to physical damage, contamination and erosion, all during normal use.
The IN6430 uses Ptec™, a specialized piezoceramic technology, to create a high frequency AC ionizing output with exceptional balance and decay performance. We eliminate HV cables by locating the power supply in the ionizing gun handle. Our OSHA compliant emitter nozzle protects both the operator and ionizer. Emitter contamination and wear are virtually non-existent with AC ionizing guns.
Ionizers that use Ptec™, technology do not require calibration and only minimal maintenance.
Specifications: Power Input AC 100V - 240V, 50/60Hz
Power Outlet Unfused, 0.5A or 1.0A max.
Ion Emission AC, 68KHz
Balance +15 volts
Decay Time 1000V - 100V, < 2 seconds @ 12"
Temperature 66-78°F (19-25°C)
Humidity 20-60% RH (non-condensing)
Air Pressure 10 - 100 PSI, CDA or N2
Indicators Power: Green LED, Alarm: Red
Controls On/off switch, Foot switch
Mounting Mounting holes on controller
Emitter Points Tungsten Alloy
Dimensions Hand Unit 8.5"H x 4"W x 1"D, (21.6 x 10.2 x 2.5 cm)
Dimensions Console 3.5"H x 6.25"W x 1.5"D, (8.9 x 15.8 x 3.8 cm)
Filter Option .01 micron filter (replaceable) *Note: Unit also may be operated without filter.
Weight Hand Unit 12 oz. (.341 kg) with 7.5" air hose
Weight Console 1 lb. (.45 kg)
Learn more about the IN6430 at ewdsolutions.com.
No comments:
Post a Comment