The new dual purpose vacuum/pressure pump and delivery system featuring PACE's patented SNAP-VAC Technology, provides the most vacuum available for desoldering applications. When used with an air pencil, the high resolution, pressure control valve allows for precise adjustment when working on the smallest components such as 0201's.
An approved operating range can be programmed allowing operators the flexibility to do their work while eliminating the risks associated with giving techs access to the entire temperature range of the system.
To maximize tip life and reduce operating costs, PACE's well recognized "SetBack" & "AutoOff" features are included. The system will automatically reduce the set temperature by 50% then turn off after a user defined period of inactivity. To really protect your more expensive Tip-Heater Cartridge and fine point tips from oxidation, the TD-100 can be used with the new "Instant-SetBack Cubby". The cubby puts irons channel into SetBack if it is in the cubby for more than 45 seconds! Up to two Instant-SetBack Cubby can be connected to the MBT350.
Rework Tips sold separately.
Learn more about the MBT 350 at EWD Solutions.
Includes:
- TD-100 ThermoDrive Soldering Iron
- SX-90 Sodr-X-Tractor Desoldering Handpiece
- MT-100 MiniTweez Handpiece
Technical Specifications:
- Power Requirements: 97-127 VAC, 50/60 Hz. 240 Watts, 2 Amp max
- Dimensions: 13.5cm H x 16.5cm W x 26cm D (5.3"H x 6.5"W x 10.25"D)
- Weight: 5Kg (1lbs.)
- Tip to ground resistance: 2 ohms or less
- Temperature Stability: ± 1.1°C (± 2°F) at idle tip temp.
- Temperature accuracy: Meets or exceeds ANSI-J-Std-001
- Temperature Range: 205° to 454°C (400°to 850°F) nominal
- Vacuum and Air Vacuum Rise Time: 150ms average as measured by PACE Process Monitor
- Vacuum: 51cm Hg. (20" Hg.) nominal
- Pressure: 18psi max
- Airflow: 8 SLPM maximum
No comments:
Post a Comment